Eu, titular dos direitos de autor desta obra, publico-a com a seguinte licença:

A utilização deste ficheiro é regulada nos termos da licença Creative Commons Atribuição-CompartilhaIgual 4.0 Internacional.

Pode:

• partilhar – copiar, distribuir e transmitir a obra
• recombinar – criar obras derivadas

De acordo com as seguintes condições:

• atribuição – Tem de fazer a devida atribuição da autoria, fornecer uma hiperligação para a licença e indicar se foram feitas alterações. Pode fazê-lo de qualquer forma razoável, mas não de forma a sugerir que o licenciador o apoia ou subscreve o seu uso da obra.
• partilha nos termos da mesma licença – Se remisturar, transformar ou ampliar o conteúdo, tem de distribuir as suas contribuições com a mesma licença ou uma licença compatível com a original.

https://creativecommons.org/licenses/by-sa/4.0CC BY-SA 4.0 Creative Commons Attribution-Share Alike 4.0 truetrue

This image still shows that the line segment is equal to the square root of pi. This is not accurate. Each individual side length of a square representing a circular area, will have a side length equal to the square root of pi divided by four, multiplied by the diameter length. This means that the diameter itself and be any length or any measurement base. A diameter of one inch can be 2.52 centimeters or any other number of measurement denotations. Pi is a ratio, not a specific number or independent value. The correct formula is (square root (pi/4) = .886226925442758. This represents a percentage conversion. This value multiplied by 2 times the radius or 1 times the diameter, will always produce the exact side length of a square with the same area as pi times the radius^2. In the case of any diameter length of 10, or converted to 10, will result in a length that represents this decimal value, multiplied by 10. For instance a diameter of ten inches would require a side length the square root of pi*25=78.539816337448. The square root of which is 8.86226925452758. This figure can always be used as the side length so long as the diameter and radius measurements are first converted to a base 10 figure. Meaning a diameter of 17 would simply be 10 and the conversion of the result would be multiplied by 1.7. In this example it would simply be .886226925452758 *10 = 8.86226925452758*1.7*15.06585773269689.